Low beams lights

Check your light bulb if you installed nnew sets.

or

You'll have to use the hex key to adjust the height

hope it helps,

Eric

"I would check that bulbs are properly seated. The light aiming should not change from a bulb change. If it really needs adjusting, open the hood and adjust height from the screw at the top of the head light, close to the fender. Adjust sidewise from a similar screw at about the centre of headlamp, at the top of course"

Here is an article with pics for adjusting the headlights:

http://www.pelicanparts.com/techarticle...