TSB Date | Problem Area | TSB Text |
05/07/18 | NHTSA ID: 10135598 TSB ID: LI07.08-P-060993 Engine diagnosis warning lamp lights up in instrument cluster, fault code u145400: "implausible data were received from the ethanol sensor" |
|
06/30/10 | NHTSA ID: 10033073 TSB ID: LI46-20-P-048484 Xentry: steering leaky at internal oil lines. connector of internal oil line or sealing washers/o-rings damaged. not necessary to replace the entire steering system. remove steering; replace both internal oil lines; install steering. mo |
|
06/10/11 | Transmission and Drivetrain | NHTSA ID: 10038208 TSB ID: LI-32-25 Mercedes-benz: there is thumping or rattling noise from the front axle area when on uneven roads. there are several causes. |
07/17/12 | Electrical and Air Conditioning | NHTSA ID: 10044603 TSB ID: LI-72-19-P053604 Xentry (mercedes): the signal light for right rear turn is inoperative. fault message displayed. |
06/08/11 | Electrical and Air Conditioning | NHTSA ID: 10037967 TSB ID: LI-82-30 Mercedez-benz: auto lights inoperative mesage is displayed. this is a software problem. |
12/14/10 | Electrical and Air Conditioning | NHTSA ID: 10034654 TSB ID: TSB-82-00-695 Mercedes: part change to banjo bolt for headlamp mount. the latch for the banjo bolt for the headlamp mount is no longer needed; therefore, the new part is now screwed onto the lamp frame using a thermoplastic nut |
NHTSA's feed only includes summaries. For the full text of TSBs:
Get a 1 year subscription for only $19.95 from ALLDATAdiy! Use Code DIYDISCOUNT. Click here now! |
||
06/30/10 | Electrical and Air Conditioning | NHTSA ID: 10033072 TSB ID: LI-54-21 Xentry: exterior lights constantly on. possible components: low beams; front fog lamp; high beams; washer fluid pump and the headlamp cleaning system are also potentially affected. hardware fault in driver side sam. model 204. no model |
05/19/10 | Other | NHTSA ID: 10032769 TSB ID: P-047912 Daimler(xentry): automatic liftgate sometimes doe not open or close completely. the drive unit of the liftgate control is actuated but does not manage to open or close the liftgate completely, (the liftgate starts moving but then stops). |